Home(Products) > MSX1000 X-Ray System Details

MSX1000HR X Ray Inspection System

High resolution micro-focus system, by new developed X ray generator.

Easy and safety operation system, by the original radiation prevention cabinet.

Best inspection system for after reworking of the BGA, and other electronic parts.

Easy maintenance system, by unit exchange of the X ray generator.

The angle of the image is changed to 0 to 60 degrees.

The manipulator enable viewpoint for 360 degrees.

Abstract

MSX1000HR is high resolution X rays inspection system of a 5 micron focus. It can be inspection of a detailed sample by sharp image.

The life of the generator is guaranteed of 5000 hours. and the life time is managed by the counter in the system.
The XY table can be controlled by the motor, and position of X ray is displayed by laser pointer. The point can be monitor through the window of the door. Normally, the life of the x ray tube will be 10000 hours or more.

The irradiation angle of X Rays is changed to 0 to 60 degrees, the angle of the XY table is fixation then.

The lamp of top of the system is blinking when the x ray generator is operating. All function of X ray are preserved by the interlock, It is immediately stopped when the door has opened at the system is operating.

The manipulator is a tool convenient for x ray fluoroscopy of small parts. it is rotated 360 degrees, and also it can be operated together irradiation angle change.

Laser Beam

The window of the door

MSX1000 X Ray Inspection System

Information of the X Ray

The X ray is an electromagnetic wave with short wave-length, it can pass through between an atom and atoms. The wavelength of visible is about several microns, but the x ray is about Å. and a penetration is in inverse proportion to the density. Generally, It is managed by the rule of the Government. It is because, the x ray gives a physiologically effect to a live-body.
MSX1000HR is managed of the radiation less than 1 micro Sv/ Hours / cm. It is lower than the color television, the CRT of the color television is always emitting the several micro Sv/H of radiation. and also there is same levels of radiation in the atmosphere always.
The radiation of MSX1000 is controlled by the very safety level. It is very safety zone. Furthermore, MSX1000 is used of the X ray in the sealed box. and it is with sufficient interlock function.

Test Sample Images by MSX1000HR

The image on the right is the BGA 1.0mm lead pitch, and also the image of 50 degrees swings are added. For the degree of angle os inclination, a top is 0, the next is 50 degrees.

X Ray generator can be adjust of the voltage of 90 Kv maximum. The penetration power will become strong if the voltage is high. And the current can be adjust of 40 micron-A maximum. the image will become bright if the current is large.

The X ray tube is by air cooling type, it will be operating continually. When unnecessary, the switch should be turn off for X ray generator, It will prolong of the life of the system.

The image on the monitor of MSX1000HR obtained about 10--140 x from the original. Therefore, when an image over from the screen, it checks by moving of the XY table. The XY table is controlled by the switch on the body, and it can be programmable control.
And if the image needed is obtained, the image data should be saved in the file, then the data can be adjust of the quality of the image by the function of the system.

60KV 40micro A / 0 Degree

70KV 50micro A /50dgrees

The image on the right is the CSP of lead pitch 0.5mm. The size of the CSP is 15.0x15.0mm. In the case, the CSP is successful of soldering. For the degree of angle os inclination, a top is 0, the next is 60 degrees.

The X ray tube is SXR-N-105, it is guaranteed of 5000 hours. And X ray I.I tube is E5877JCA1-2A/NU by Toshiba, It is guaranteed of 10000 hours. It will be the exchange for every unit, when those exchange is required. It means that maintenance is easy.

70KV 15 micron A - 0 degree

70KV 15 micro A -60 degrees

Dimensions

MSX1000HP/HR (880W x 1560H x 950D mm)

Specifications

Items		Specifications
		MSX1000HR
Board Size		300x360mm max
XY Table Stroke		180Yx180Xmm
XY Table Control		Motor Controlled by touch panel
XY Table Size		350W x 400D mm
Position marker		Red marker by laser beam
X Ray Source Voltage		30---90 Kv
X Ray Tube Current		40 micro A
Focus Size		5 micron m
X Ray Tube		Enclosed Penetrated Type
Cooling		Air cooling Closed
Image Angle		0 --60 Degrees
X Ray Radiation		Less than 1µSv/H
X Ray Protection		X Ray protected special Cabinet
Camera		CCD 1/2 inch 400K bit 525 line NTSC
Image Magnification		12--60 x (max240 GX vision)
Detector (I.I)		E5877JCA1-2A/NU(Toshiba)
		Out put image 20mm
		4/2 inch selectable
PC		Desk Top
CPU		2.53GHz
Memory		512MHB
Storage Unit		CD-R/RW, FDD3.5, HDD 80GB
OS		Windows XP
LCD		17 inch 1280 x 1024
Image Controller		Quality Control for Averaging, Integrating.
		Enhancement Processing
		Contrast & Brightness Control
		Area arithmetic for oval, circle,BGA and void.
Image Processing	Management	4-view/16 view display
		Black/white reversal, 3D display
		Magnification ( x1 to x8 )
	Measurement	Distance along wire frame / Gap of two round shapes
		Distance: between 2 points at X and Y.
		Ellipse area, Polygonal area, BGA area, Void area
Power		AC230V 500VA
Body Size		880Wx1560Hx960Dmm
Weight		300Kg approx.

The specification are subject to change without notice.

>>Top of Page

SMD Rework Solution

We are specialist for SMD Rework such as 0402 chip, CSP,BGA and QFP etc.