MSX500 can be continuity operation about 1 hour by the X ray generator of DC inverter of original development. The life of the generator is guaranteed of 1000 hours. and the life time is managed by the counter in the system.
The XY table can be controlled by the motor, and position of X ray is displayed by laser pointer. The point can be monitor through the window of the door.
The lamp of top of the system is blinking when the x ray generator is operating. All function of X ray are preserved by the interlock, It is immediately stopped when the door has opened at the system is operating.
The window of the door
The image on the right is the BGA 1.27mm lead pitch, it has a soldering bridge. and also the image sample of the BGA 1.27mm pitch, it can be check of some void. In this case, the size of the void is about 0.2mm diameters.
X Ray generator can be adjust of the voltage of 7Kv maximum. The penetration power will become strong if the voltage is high. And the current can be adjust of 3 mA maximum. the image will become bright if the current is large.
Control Panel of MSX500:
The X ray tube is by air cooling type, it will be operating continually around one hour. When unnecessary, the switch should be turn off for X ray generator, It will prolong of the life of the system.
The image on the right is the CSP of lead pitch 0.5mm. The size of the CSP is 7.0x7.0mm. In the case, the CSP is successful of soldering.
The image on the monitor of MSX500 obtained about 30 x from the original. Therefore, when an image over from the screen, it checks by moving of the XY table. The XY table is controlled by the switch on the body, however, remote control is also possible as an option.
And if the image needed is obtained, the image data should be saved in the file, then the data can be adjust of the quality of the image by the function of the system.
Void on BGA 1.27mm pitch
7.0x7.0mm 0.5mm pitch CSP
MSX500SW can be made to incline to 45 degrees maximum of the X ray, Other all specification are same as MSX500.
QFP(0.8mm Lead Pitch)
Swung image about 30 degrees.
MSX500/MSX500SW (L type is 830Wx950Dx740H)
|Board Size||330x250mm max||400x510mm max||330x250 max|
|XY Table Stroke||120Yx160Xmm||180Yx180Xmm||120Yx160Xmm|
|XY Table Control||Motor Controlled|
|XY Table Size||350x250mm||450x550mm||350x250mm|
|X Ray Source Voltage||70Kv|
|X Ray Tube Current||3mA|
|Image Angle||0||0~45 degrees|
|X Ray Radiation||Less than 1ÁSv/H|
|X Ray Protection||X Ray protected special Cabinet|
|Image Magnification||25 x (on the monitor screen)|
|Detector||CCD 1/2 inch|
|Storage Unit||CD-RW, FDD3.5, HDD40GB|
|Image Controller||Quality Control.|
|Power||AC230V 500VA||AC230V 800VA|
|Weight||120Kg approx.||150Kg Approx||130Kg Approx|
The specification are subject to change without notice.