SMD Rework Solution

We are specialist for SMD Rework such as 0402 chip, CSP,BGA and QFP etc.

Japanease Contact Us Site Map


MS9000SAN-III:


Rework Station:
Accessories:
Related Systems:
Home(Products)  >  MS9000SAN-III Specifications

MS9000SAN-(III) Rework Station


Specifications


Item Specifications
Board size 50x50--- 400x500mm
thickness 0.5--3.5mm
Weight 3Kg max.
Top Space up to 45mm max.
Bottom Space up to 25mm max.
XY Table Fine Adjust +&- 5.0mm max.
Moving Range 150x200mm max.
Board Holder Z Slot or Holder Jig
Board Support Under side 4 pins with 2 rails
Z Axis Auto- Pickup & Mount of Components.
Stepping Motor Controlled ( 2.4mm/sec)
Accuracy Repetition Accuracy: +&-:0.025mm
Adjustable Angle Nozzle Angle Adjuster:+&- 5 degrees
Vision System Component Size: 1.0x1.0/50x50mm
Magnification :zooming x75 max.
Focus Auto/Manual selectable
Touched Panel On the 10 inch LCD touch screen
Monitor 22 inch LCD
Top Heater Hot air 260x4=1040VA
Bottom Heater Standard:by IR 1000VA (150x300mm )
Optional Wide Type IR3000VA (300x450mm)
Optional Spot Air 50Фmm 520VA
Controller 10 inch Color Touched Panel System
Temp. Controller ITTS Auto-Thermal-control system
Manual Mode 6+1 zones PID Control available
Data Setting Top heater: 000---450
Bottom Heater: 000---600
Time Range Heating: 000----999 sec.
Cooling: 000----999 sec. (Manual/Auto)
Temp. Measuring
Accy: <±0.5%FS+1C		 A mode: 2CH+2(ITTS) by CA-K Sensor
M mode 2 CH
Data Save 100 for A mode+100 for M mode max.
Data Analyzer Peak and Time interval for each CH.
Power 220-240V AC 2 phase 2.5KVA
Air 0.5Mpa (N2 possible)
Dimension 650Wx860Dx730Hmm
Weight 80Kg approximate.

The specification are subject to change without notice.


>>Next Page

M.S.Engineering Co.,Ltd.
2-17-11, Shinyokohama Kohoku-ku Yokohama-shi, Kanagawa-ken 222-0033 Japan.  Phone: +81-45-472-6441 / Fax: +81-45-472-6432
Copyright(C)2007 M.S.Engineering Co.,Ltd. All rights Reserved.